Sunday, August 25, 2019
Variance analysis Essay Example | Topics and Well Written Essays - 500 words
Variance analysis - Essay Example The overall costumersââ¬â¢ performance in 2008 was better. In fact, it was also exceeded the anticipated average customersââ¬â¢ spending by $1,520.Nontheless, there was a variation in the individual customerââ¬â¢s spending. The companyââ¬â¢s top 20 customers are include: Webber Rob ,Chandler Laverne, Locke Lanny, O Malley Grace, Antekier Gigi, Chubin Spencer, Harmon Majorie, Stuart Nathan, Galaviz Aldon, Sample Lorrie, Badillo Murrel, Sheppard Caroline, Shenton Bartley, Felt Dominic, Lockard Roz, Fain Mina, Waterworth Vera, Abrahamson Gaige , Britton Alisa, and Spencer Jude. On the other hand, the worst 20 customers include: Chivalan Rebecca, Cobb Petr, Dahlbeck Augie, Fowble Pat, Furst Gardner, Holzer Tracey, Hull Lorvel, Robinson Alpha, Talman Holly, Wayne Dayle, Allbritton Tad, Grenier Elsa, Hendricks Audrey, Innes Gilbert, Ledford Wendel, Stephens Sylvain, Yadon Kate, Daniels Kethy, Jackson Sophia, and Wilkins Rom. With reference to product performance, the companyââ¬â¢s products recorded astounding performance, better than the expected. In this regards, the average sales were $ 1,795,664.76. in terms of individual product performance, the top 20 best selling products are: Electronics Sony, Electronics RCA, Electronics Sharp, Movies Matthew Broderick, Electronics Panasonic, Electronics Hewlett Packard, Movies Eddie Murphy, Movies, Liam Neeson, Movies Jack Nicholson, Electronics GPX, Movies Tom Hanks, Electronics New Media, Movies Richard Bradley, Music Alison Krauss, Books Geneen Roth, Music Blackhawk, Music Live, Music Aaron Tippin, and Electronics 3Com. On the contrary, the bottom 20 products in terms of sales are: Books Mark Wilson, Books Young, Music Sound Effects, Movies David Barton, Books Doug Hall, Books Jonathan Baird, Books David Miles Huber, Movies Robert Powell, Books Edward R. Tufte, Movies Billy Blanks, Music Doo Wop Box, Music Various Artists , Books Andy Rooney ,Books Stephen Sacks, Music
Saturday, August 24, 2019
Tort Law Essay Example | Topics and Well Written Essays - 500 words - 2
Tort Law - Essay Example It should be seen in the sense that, the most courts do not mark out the bounds of duty that limits the defendant responsibility. What they sometimes do is protecting the interests of the individual who is seen to have suffered a loss. However, it is also important for the courts to be able to limit the defendantââ¬â¢s responsibilities because of the problems arising due to ââ¬Å"floodgatesâ⬠. In addition, sometimes the courts treat certain groups of defendants leniently through limiting their liabilities in some of the cases 1 On the other hand, the courts can decide to draw a line marking out the duty bounds to protect the interest as well as giving out compensation to the individuals who have gone through suffering and injury. This act of fairness is considered the major aims of tort law. Limitations placed on the defendants responsibilities act as a fundamental necessity to prevent a situation in which countless, potentially tenuous or spurious, claims that are against the tortfeasor. The policies that restrict the bounds of duty try to ensure justice and reasonable compensation to the victim. This is done without exposing the claimants to a given level that he or she might get tempted and the defendants to such a hard labor that would be as a result of lack of policies and precedent. Many attempts have been there to help in establishing the bounds on duty such as Dongue v Stephenson that has gone through development, to more recently the Caparo test that states that the act or omission must be foreseeable, just and proximate, fair and reasonable in order to have a care of duty. This case was central to the formation of duty of care, which was which was an important concept that limited the responsibility by outlining the idea of a reasonable man. The Capro test evolved from this case, and it is becoming clear that many courts are attempting to defendants responsibilities. Another case
A Vision for Tel Aviv Case Study Example | Topics and Well Written Essays - 500 words
A Vision for Tel Aviv - Case Study Example Here may be seen a working model for the future. Hypocrisy has no place here- there are no 'third-class Israelis' here.( Derfner , 'Third-class Israelis') During that visit a student was asked how all of them got along so well in the school. His answer- "We are all human beings and we treat each other equally" prompted the Rabbi to write, "We should listen and learn from this radiant gem of youthful wisdom. We are all God's children, created in the Divine image. Our sacred task is to see the Divine in one another, and to brighten and restore God's image here on earth." (Diamond, Religious Leaders of Greater Los Angeles Mission to Rome & Jerusalem) Diamond, Rabbi Mark S. Executive Vice President, Board of Rabbis of Southern California, Religious Leaders of Greater Los Angeles Mission to Rome & Jerusalem, January 29, 2008. http://www.boardofrabbis.org/Rome-&-Jerusalem-2008 . Retrieved on 15 April, 2009.
Friday, August 23, 2019
International finance Assignment Example | Topics and Well Written Essays - 2250 words
International finance - Assignment Example The system of the Agreement was aimed towards keeping the major currencies of the world at a fixed rate. With the collapse of the system, the world economies have been facing the volatility which is continuing at present as well. Under the system of Bretton Woods, the various countriesââ¬â¢ major currencies were used to be fixed in relation to the Dollar while the Dollar was fixed with respect to the value of gold. This system indicated that the threat of currency instability was to be abided by the governments. As a result of this system, the corporation houses were to deal with lesser trading activities related with foreign currencies on a large volume. The system of the Bretton Woods Agreement at that time was factually capable of providing significant firmness within the markets of currencies (Hussain, 2010). The governments prefer fixed exchange rates to floating exchange rates which is prevalent at present in the world economies because under the later system, the currencies ââ¬â¢ demand and supply factors are the determinant of the rate of exchanges within the market of foreign exchange. Thus, the governmentsââ¬â¢ power over the fluctuations of the currency valuation gets removed under the floating rate system. Along with this fact, the risk associated with the currency and financials appears in privatised form (Ono, 2004). On the other hand, the distinctive system of the fixed exchange rate allows the governments or respective authorities to bestow controls over certain tools of the monetary policy such as that of the regulation on the rates of interests and supply of money through issuing fresh bills. However, the authorities in charge of the monetary policies function under the control and regime of a board of currency which allows the authorities to enhance the money supply only after ensuring that the particular country has sufficient reserves of the foreign currency that are essential for backing up the enhancement of domestic currency with in the nation (International Monetary Fund, 2009). More precisely, it is due to the following advantages of fixed exchange rates in the international monetary system that government prefers to preserve it. Firstly, due to the existence of fixed exchange rate system, price constancy in the international trading market can be ensured for the purpose of effective performance on trading. Price stability in the international trading market aids towards its growth and it also assures less risk for the businesses. Secondly, fixed exchange rates are termed to be inclined towards policies against inflation under this system. The countries are required to operate under strict policies related to both monetary as well as fiscal administration. Thirdly, the regimes under the system of fixed exchange rate demand from the Central Bank that it should uphold huge amount of foreign reserves in the form of both hard currencies and gold as well. This requirement of the fixed exchange rate regime helps in backing up risks that can arise due to any adverse situation of the international market (Fordham University, 2011). Along with the above mentioned benefits, another essential benefit sought by the government that make the fixed exchange rate system preferable for the government is that fixed rates are highly
Thursday, August 22, 2019
Water Pollution Essay Example for Free
Water Pollution Essay More people die from dirty water and poor sanitation in Africa, than acts of violence , including war(ââ¬Å"Why is Clean Water so important?â⬠). Children are especially targeted for disease, because their immune system is smaller, and they are younger (ââ¬Å"Why Water?â⬠). Africa has many poor countries, and many people are dying from diseases in water. Every day, people have to walk over five miles to get a bucket of water for the family they are in. Most of the time, the only water people can find is dirty. Dirty water causes children to develop diseases every year. In fact, over eighty percent of disease is caused by unclean water (Drop in the Bucket). Many organizations are desperately working to give third-world countries the water that people need. The organizations want to build a well for every village in Africa, so there is no more disease breaking out, and people want to reduce the death toll of 2,000 a day, to a much lower amount(ââ¬Å"Water Aidâ⬠). In Africa alone, people spend 40 billion hours every year just walking for water. Women and children usually bear the burden of water collection, walking miles to the nearest source, which is unprotected and likely to make them sick (ââ¬Å"Why Water?â⬠). There are many ways one can help Africa reduce their pollution, especially in water. One way that takes the least amount of effort, but makes a big difference, is to donate to an organization. There are so many of them that are serving Africa, and the more donations, the better. People want to end poverty right? Another method of impact is to never waste water. If one cannot finish water, give it to a plant, or save it for later. But never throw it away. The last method of impact is try to reduce the pollution in communities around you. If the world has too much pollution, Americaââ¬â¢s water will end up like Africaââ¬â¢s, and our population will reduce and reduce, and at some point, the world might even end. To sum it up, the pollution in Africa is on the rise, and people need help to get clean water. First world countries like America have no idea how much people waste clean water, and how lucky those people are to have it. So in the future, donââ¬â¢t waste water, one will never know who doesnââ¬â¢t have it. Works Cited Drop in the Bucket. Drop in the Bucket. N.p., Jan. 2013. Web. 30 Jan. 2013. What Makes Clean Water So Important? Blue Planet Network. Blue Planet Network, 12 Jan. 2013. Web. 29 Jan. 2013. Worlds Top 10 Most Polluted Places. Worlds Top 10 Most Polluted Places: Scientific American. Scientific American, Jan. 2013. Web. 29 Jan. 2013.
Wednesday, August 21, 2019
Electrostatic Ion Thrusters
Electrostatic Ion Thrusters Abstract The ion thrusters belong to the electric propulsion category and are used by modern spacecraft either to maintain their position relative to the Earth or to complete deep space missions. Their main characteristic is the high specific impulse which involves an efficient use of the propellant, a mandatory requirement for space activities where weight is the main restriction. The thrust is generated by the acceleration of ionised gas at very high velocities. The mechanism used to achieve the acceleration distinguishes these propulsive devices in two main categories: electrostatic and electromagnetic. In the first type, a potential difference accelerates the ions through the Coulombs force. In the second type the interaction of the ionised gas with a magnetic field generates the thrust through the Lorentzs force. This paper focuses on the analysis of the main features and architectures of the electrostatic ion thrusters. In the first part, the reasons why they are used for space applicat ions are explained. Afterwards, the propulsors physic and the working principles are illustrated with considerations on their advantages and limitations. Eventually, an overview of the field of applications and future design innovations is presented. Keywords: Ion thrusters, Hall thrusters, Feep Nomenclature EPElectric Propulsion ESAEuropean Space AgencyNASANational Aeronautics and Space AdministrationJAXAJapan Aerospace Exploration AgencyGEOGeostationary Orbit LEOlow Earth Orbit STPStationary Plasma Thruster Electrostatic ion thrusters are a major area of interest within the field of space applications. Thanks to the constant heightened of electrical power available in modern spacecraft the last two decades have seen a growing proliferation of this technology. The concept of electric propulsion has been theorized for the first time by Robert H. Goddard in 1906[1] and Herman Oberth in 1929[2] but it was not until 1948 that the research efforts on ion thrusters implementation on a spacecraft began. A considerable contribution was given by the work of Ernst Stuhlinger[1]. Early experimental tests started during the 50s and leaded to the first successful space test in 1964 with the SERT-1[3]. With the end of the Cold War and the Space Race the interest in these devices diminished but just for a short period. Today in fact ion thrusters are essential for a wide range of space missions. In this paper, after a brief explanation of the importance of high impulse thrusters for space applications, the three main architectures of electrostatic ion thrusters are presented. For each category the paper will look into the working principles, evolution over the years, applications in space mission and future development of the technology. The essential reason of the development of the ion thruster for space applications is the extremely high efficiency in the utilisation of propellant mass and the corresponding reduction of the launch costs, a critical parameter for the mission feasibility. Moreover this technology permits to performs deep-space missions otherwise inaccessible to conventional chemical rockets[4]. The reason lies in the Tsiolkovskys equation which can be derived from the Newtons law of momentum conservation: Where and are the final and the initial spacecraft mass respectively, is the velocity change and is the exhaust velocity. The equations shows that must be comparable to to have a significant fraction of final mass. Thrusters that provide a large propellant exhaust velocity compared to the mission will have a propellant mass that is only a small fraction of the initial spacecraft wet mass. Space mission are classified by the amount of velocity change needed for the orbital maneuvers, planetary mission for example requires velocity above 10 km/s[4]. Table 1:Characteristic velocity increments Mission [km/s] 1 year station keeping 10 LEO GEO 3.5 Earth Mars (return) 14 Earth Venus (return) 16 Earth Jupiter (return) 64 Earth Alpha Centaury (return) 30000 The exhaust velocity is directly proportional to the specific impulse, which can be seen as a measure of the propellant acceleration efficiency. The formulation is: where in the mass flow and the sea-level gravitational acceleration. Typical values of different propulsive systems are listed in table 2. It can be seen that the necessary velocity augmentation is much larger than the typical chemical rocket exhaust velocity, for this reason they are not suitable for this kind of missions. The latter is restricted by the intrinsic energy of the propellant, thermal limitations of the materials and frozen flow losses[4]. For electric thrusters the propellant and the energy source are independent and the specific impulse depends only on the energy deposed into the plasma[5]. Another key strength of ion thrusters is the high thrust efficiency: where is the available electric power and is the thrust. The equation shows that defined a large specific impulse leads to a very low thrust level which is a typical characteristic of ion engines. As a consequence this kind of thrusters requires a large amount of propulsion time, actually the opposite of what happens with chemical propulsion, characterised by high thrust levels over a short time. Table 2: Representative specific impulse and thrust levels of different propulsive systems [2] Propulsive system [s] Thrust [N] Liquid monopropellant 200 250 0.01 100 Liquid bipropellant 300 450 0.01 10^7 Solid propellant 200 300 1 10^6 Hybrid propellant 250 350 1 10^6 Ion Thrusters 2000 5000 Hall Thrusters 1500 2500 Feep Thrusters 5000 0.001 Electrostatic ion engines overcomes the limitations on the attainable exhaust speeds of conventional chemical rockets by the acceleration of the propellant through an electrostatic field. They can be divided into three main categories: Gridded Ion Thrusters, Hall Effect Thrusters and Field-Emission Electric Propulsion. In each of those the same main functions are performed: generation of the plasma, ions acceleration and ions neutralization. This configuration is the most fully developed and studied concept of electric propulsion [4]. The standard design comprises a metal ionisation chamber surrounded by magnets and three grids at the exit position. Acc elettroni 4.1 Ionisation and extraction Plasma is a ionised gas where approximately an equal number of positively charged protons and negatively charged electrons coexists[6]. The generation of positive particles requires an energy equivalent to the first ionization energy of the propellant. This amount of energy has an impact on the maximum attainable efficiency of the thruster that according to[5] can be written as: where is the ionisation energy and is the ion mass. The equation displays that the higher the ion mass and exit velocity (hence specific impulse) the higher the efficiency while decreases it. For this reason propellants with a low specific ionisation energy (alkali metals and noble gases) are preferred. The lower limit for the utilisation on these type of thrusters is 2000 s. Modern ion thrusters uses Xenon as a propellant since it has a large atomic weight and it easy to store because it is an inert gas, although Mercury and Caesium would be more performant propellants since their mass is much larger and the ionisation energy slightly greater, the higher toxicity prevents their use in experimental tests. Propellant Ionisation potential [eV] Atomic mass [AMU] Caesium 3.9 132.9 Mercury 10.4 200.6 Xenon 12.8 131.3 Krypton 14.0 83.8 Hydrogen 15.4 2.0 There are two mechanisms to create the plasma: the electron-bombardment and the relatively recent frequency excitation. In the first type electrons emitted from a thermionic or a hollow cathode collide with the propellant gas and generates positive ions. The electrons tend to reach the anode but the presence of an axial magnetic field generated by the magnets outside of the chamber causes a spiral path that improves their confinement and the ionisation efficiency. When an electron ionises an atom its energy decreases and when it drop below a certain level the magnetic field is not able to confine it anymore and it is extracted by the anode. In the second type the ionisation chamber is surrounded by a coil that induces an axial electro-magnetic field that ionises the gas. This method has some advantages such as the elimination of the cathode which improve the thruster life and a larger range of mass flow variation [7]. The number of ions created is equal to the number of electrons captured by the anode and an equilibrium condition is established. The plasma potential is slightly higher than the one of first grid, as a consequence the generated ions are attracted towards the exit of the chamber. In this region a sheet of the debaey length causes a natural curvature of the electric field and permits the extraction of the ions. Sheets debay 4.2 Acceleration The extraction of the ions from the ionisation chamber and the acceleration are performed by an electric field applied by three perforated grids. The first one acts as a screen while the second and the third accelerate and decelerate the gas respectively. The design of the grids is crucial and is based on a trade-off among performance, life and size. The grid holes diameter is defined by conflicting targets, it must be enough small to retain the unionised gas but maximised to provide an high grid transparency to extract the maximum possible number of positive ions[5]. An high potential difference is applied between the first and the second grid which accelerates the ions: where and are the ion charge and mass respectively and is the potential difference. The potential of the intermediate grid is negative in order to avoid the back-streaming of the electrons from the neutralizer cathode. The presence of positive particles only, during the acceleration, leads to an essential upper limit in the ion current density that can by provided and hence to the thrust density (N/m^2) of this devices with adverse consequences on their size[7]. The limit is dictate by the Child-Langmuir law[8]: that involves a thrust per unit of area of: where A is the cross area of the jet, d is the distance between the grids and is the electric constant. The formula demonstrates that to have compact device heavy ions and an high voltage are needed while the gap between the grids must be very small and this constitutes a thermal, electrical and structural challenge. Adopting Xenon and the maximum electric potential difference with nowadays technology level (typical value is 1000 Volt) the value which is very low. The exhaust speed achieved in this case, and hence the specific impulse, is excessively high considering the actual space mission requirements. Since just lowering the potential difference would reduce the already small value of thrust density a third deceleration grid is added[1]. Placing the acceleration grid at a negative potential the problem of the excessive velocity is solved without compromising the thrust density. The value of the required specific impulse determines the value of the third grid potential[5]. The single charge nature of the beam causes the repulsion between the accelerated ions which tend to diverge from the axial direction. Since the repulsion force is proportional to the beam diameter the latter is subdivided into small portions with order of magnitude equals to the grids distance. Since the electric field generated by the first grid is convergent the grid can be designed in such a way that particles trajectory became axial due to the repulsive force inside the beam. The grid geometry and the ions trajectory have a crucial roles in determining the thruster life, for this reason they are made of heavy metals such as Molybdenum, Graphite composites have been recently introduced[7]. Even though the grid are accurately designed, a secondary current of low energy ions hits the accelerator grid causing erosion. This current is caused by the Charge-Exchange Ionisation: some neutral atoms of propellant escaping from the ionisation chamber are struck by beam ions and a charge exchange happens[5]. The resultant low energy ions are accelerated towards the intermediate grid with enough energy to consume it over a long period. This process leads to a distortion of the grid holes that increases the damage until a structural failure of the grid occurs or the back streaming of electrons is not prevented anymore. 4.3 Neutralisation If the positive charged ions beam exiting from the thruster is not neutralised the thruster acquires a negative potential and causes the ions back-streaming. The neutralisation is achieved by the emission of a negative current by an hollow cathode positioned outside of the ions streams. Since the potential difference in this case is very low (electrons dont need to be accelerated) and the distance is an order of magnitude larger than the grid gap, the Childs law prevents the emission of a pure electrons current. The solution is the utilisation of a plasma bridge, a global neutral plasma with an electrons current inside. The hollow cathode is constituted by a tube of refractory materials and an orifice plate at the downstream end[9]. Inside the tube an insert made of tungsten is impregnated with a low work-function metal. The cathode is wrapped by an heater that allows electrons emission through thermionic effect when temperature reaches 1000Ãâà °C[9]. Xenon is fed into the tube and electrons emitted from the insert are extracted by a keeper electrode downstream of the orifice. 4.4 Evolution of the technology and future development The first ion engine flight was the demonstrative mission Space Electric Rocket Test (SERT 1) in 1964[3], followed in 1970 by the SERT 2 whose two mercury thrusters achieved 2000 and 3700 hours of operations respectively providing 300 restarts[10]. The first use of gridded ion thrusters adopted for station keeping for commercial applications has been the XIPS-13 in 1997 for the PAS-5 (PanAmSat-5) communications satellite[5]. The subsequent generation of gridded ion engine, NSTAR, was developed by NASA JPL and Boeing. This thruster equipped the Deep Space 1 in 1998[11], a demonstration spacecraft that reached an asteroid and a comet. It provided 16000 hours of operation during the mission and over 40,000 hours of life testing[5]. Hundreds of papers have been published on its design and performance. In 1999 an evolution of the XIPS-13, the XIPS-25, was first lunched on a Boeing 702 Satellite[12]. This second generation is capable of providing orbit raising other than station keeping and momentum control. To date these thruster have been used for station keeping on Boeing 702 class satellites for more than 10 years, and 68 are currently operating in orbit on 17 spacecraft[5]. The next model used for station keeping was lunched on the telecom satellite Artemis in 2001 by the ESA. It used two T5 and two RIT thruster developed by Astrium[13]. The satellite reached a GEO orbit thanks to the ion thrusters used as a primary propulsion for recovery the chemical stage failure. In 2003 JAXA lunched the Hayabusa mission which equipped with four ion thrusters collected samples from an asteroid and returned to Earth in 2010[14]. Later in 2007 the Dawn[ mission of NASA was lunched to study two protoplanets in the asteroids belts, Vesta and Ceres, it has been the first time that a spacecraft orbited around two different solar system bodies, it would have been impossible without ion engines[15]. In 2009 the Gravity Field and Steady-State Ocean Circulation Explorer (GOCE) mission was lunched to study the variations of Earth gravitational field[16]. The key component of the mission were two ion thrusters for drag compensation. A new challenging mission named Bepi-Colombo is planned for October 2018 by a collaboration between ESA And JAXA[17]. The aim is the exploration of Mercury and will use four QinetiQ T6 ion thrusters. Another gridded ion thruster available in near future will be the NASA Evolutionary Xenon Thruster (NEXT)[17], Glenn Research Center manufacture d the test engines core ionization chamber, and Aerojet Rocketdyne designed and built the ion acceleration assembly[18]. A long duration test(LDT) was initiated in 2005 and was voluntarily terminated in 2014 after more than 50000 hours of operation and almost 1 ton of Xenon consumed. Post-test inspection highlighted the readiness of the thruster for space use[19][20]. It has been proposed for several future missions[21]. The first two flight units will be available in early 2019. Name Power [Kw] [s] T [mN] SERT 1 1.4 4900 28 XIPS 13 0.33 2570 18 NSTAR 0.5-2.3 3100 20-95 XIPS 25 4.5 3800 165 RIT 4.3 3-5000 150 T5 0.27-0.65 3-3500 10-25 T6 5.2 3500 40-200 NEXT 0.5-7 4200 237 The Hall thrusters are direct competitors of the gridded ion thrusters, even if they have a lower efficiency and specific impulse the thrust density is many times greater since both ions end electrons are accelerated and the Childs law is not a limit. The system is based on a fundamental effect discovered in 1879 by Edwin H. Hall[22], he showed that in presence of a perpendicular electric and magnetic field an electric current flows perpendicular to both. This phenomenon is exploited for the ionisation and the acceleration of the propellant. 5.1 Working Principles The ionisation chamber is axisymmetric, enclosed in two concentric cylinders. A radial magnetic field is applied through permanent magnets or solenoids, at the entrance of the chamber is situated a metallic anode from which the propellant is injected. At the cylinder end an hollow cathode emits an electrons beam that is divided into two parts. About 60-80% of the electrons are used to neutralise the positive ions ejected from the chamber, the remaining are trapped by the magnetic and the electric fields at the chamber exit and constitute a virtual plasma cathode[7]. The direct flows of the electrons towards the anode is prevented by the Hall effect which causes a spiral trajectory of the electrons. The propellant unleashed at the chamber entrance moves towards the electrons region and is ionised. Then the resultant electric field accelerates the ions. The long residence time of the electrons in the annular chamber, due to the magnetic confinement, makes the ionisation very efficient. Even if the magnetic field is determinant for the thruster operation the acceleration is achieved by a stationary electric force. The magnetic field that confines the electrons, which peaks at the exit, affects the ions trajectory causing a disturbance tangential torque that must be compensated and an high beam divergence angle of about 40Ãâà ° that reduces the thrust efficiency and may cause electrostatic charging and interference to the satellite communications. The ionisation is much more efficient than in the gridded ion thrusters thanks to the lower ionisation energy requested and permits to achieve satisfactory efficiency 50-60% even with a relative low specific impulse. The considerable complexity of the plasma dynamic due to the presence if the magnetic and the electric field within the thruster causes fluctuations in the electron density that could cause severe damages, for this reason the electric potential is limited to 350 Volts. 5.2 SPT and TAL variants On the basis of the different materials that constitutes the cylinder wall in contact with the plasma Hall thrusters are divided into Stationary Plasma Thrusters (SPT), that are characterised by insulating walls made of boron nitride and silica compound (BN-SiO2), and Thruster Anode Layer (TAL) which have a conductive one[23]. Since the walls are continuously hit by some electrons and consecutively emits other electrons because of the secondary electron emission (SEE) effect, if the wall are metallic the resultant quantity of electrons is larger, the electric field is more intense and the potential drop occurs in a shorter distance. The result is more compact architecture with higher thrust density. The power loss are also related to life are strongly influenced by wall interactions. For SPT thrusters a significant amount of their power is lost on the dielectric channel walls due to electron bombardment. The metallic walls in TAL thrusters gather a smaller electron current since they have the same potential of the cathode which rejects the electrons and they have a small exposed area to the plasma, which limits the amount of ion and power lost to these surfaces. On the other hand the shorter chamber raises the intensity of the discharge current on the anode because the magnetic confinement is less effective [7]. 5.3 Evolution of the technology and future development The first Hall-Effect thruster to operate in space was the SPT-50 aboard the Soviet Meteor spacecraft in 1971 and was mainly used for satellite stabilization. Starting from that year more then 140 Hall thruster have been used in space[24]. Subsequently Hall engine of different power and size were developed with the introduction of the SPT-70 and SPT-100 in 1982. With their introduction in the west after the fall of the Berlin Wall in 1989 lot of research have been carried out by United States, France, Italy and Japan. The first US mission that adopted this technology was the demonstrator STEX spacecraft using D-55 TAL Hall Thrusters manufactured in Russia[25]. In 2004 the ESAs satellite SMART-1 adopted the Snecma PPS-1350-G, with a design similar to the SPT-100, to reach the lunar orbit from GTO[26]. The mission finished in 2006 with a controlled collision on the Moons surface. The probe covered more than 100 million kilometres, consuming just 82 kg of propellant. The joint venture between the Busek Company and Aerojet Rocketdyne leads to the development of the BTP-4000 designed for US military spacecraft as well as commercial satellites. In 2000 an agreement between Aerojet and Lockheed Martin Space System Company (LMSSC) developed the Hall Thruster Propulsion System (HTPS) for the next generation LMSSC geosynchronous spacecraft, this program adopted the BPT-4000 because of the ability to operate in a large range of powers and thrust modes allowing both station keeping and orbit raise[18]. Flight test qualifications and improvements lead to the discovery of the magnetic shielding phenomenon[27]. The achievement of a particular magnetic topology that essentially blocked the chamber wall erosion after 6000 hours, the developed erosion model enabled the possibility to predict andextent the engine lifetime. This thruster, used on the Advanced Extremely High Frequency (AEHF) communications satellites constitutes the currently most powerful Hall en gine in operation. In 2009 AR and Lockheed Martin developed the XR-12, the first Hall thruster in the 10kW class, it was intended for the US Air Forces TSAT constellation but after the cancellation of the program its use for future missions have been studied by NASA. In the recent years high power and thrust Hall engine have been investigated thanks to the increasing of the available spacecraft power. The consequent increase of thrust reduces the amount of time for the mission and permits a larger payload. In Europe Snecma developed the PPS-20k for the HiPER Project, an European project to study innovative electric propulsion technologies for future space transportation and exploration. In 2010 NASA promoted the Human Exploration Framework Team (HEFT) to investigate new technologies for a future human space exploration and high power Hall thrusters, thanks to the high power processing capabilities and extensive range of thrust levels, were chosen as a possible technology. The NASA-457Mv2 50-kW class, whose development started in 2004, has been tested during 2011 with satisfactory results. This model can be a potential point of start for future NASA exploration missions. Another step forward has been made with the development of the X3, a 100-kW class three-channel nested Hall thruster, designed by the Plasmadynamics and Electric Propulsion Laboratory (PEPL) at the University of Michigan, in collaboration with NASA and the Air Force Office of Scientific Research. Its performances up to 30 kW have been recently successfully tested and further measurements in order to analyse the complete operating envelopment up to 200 kW will be effectuated in the near future. Name Power [Kw]
Tuesday, August 20, 2019
Effect of Globalization on Market Processes
Effect of Globalization on Market Processes This is the concept is well established in the current market process, Globalization is the international process and activities. Generally globalization means countries interrelated and integrated each and other. But academics and professionals provide different definition to globalization as follows, (Suny Levin institute) Globalization is a process of interaction and integration among the people, companies, and governments of different nations, a process driven byinternational tradeandinvestmentand aided byinformation technology. This process has effects on theenvironment, onculture, on political systems, oneconomic developmentand prosperity, and onhuman physical well-beingin societies around the world Ambassador Gà ©rard Stoudmann Globalization is a process that encompasses the causes, course, and consequences of transnational and Trans cultural integration of human and non-human activities.â⬠Anthony McGrewââ¬â¢s Globalization [is] a process which generates flows and connections, not simply across nation-states and national territorial boundaries, but between global regions, continents and civilizations. This invites a definition of globalization as: ââ¬Ëan historical process which engenders a significant shift in the spatial reach of networks and systems of social relations to transcontinental or interregional patterns of human organization, activity and the exercise of power. Sociologist Cesare Poppi ââ¬Å"The literature stemming from the debate on globalization has grown in the last decade beyond any individualââ¬â¢s capability of extracting a workable definition of the concept. In a sense, the meaning of the concept is self-evident, in another, it is vague and obscure as its reaches are wide and constantly shifting. Perhaps, more than any other concept, globalization is the debate about it Generally, globalization has affected many nations in various ways; economically, politically, and socially. It is a term that refers to the fast integration and interdependence of various nations, which shapes the world affairs on a global level. Globalization has affected the products people consume, the environment, culture, security, and idea exchange between different countries. There are many factors that lead to the speedy globalization trends. Factors drive the globalization Globalization is the current strength of business and organization globalization is occurred for the following drivers otherwise globalization cannot achieve the better position in the market. Specially globalization emphasis drivers or factors illustrate under three category that are Market drivers Cost drivers Competition drivers Environmental drivers Market drivers Customer needs and wants is the main concern in the globalization, today market moves to updated service and process, but the organization consider the customer wants and need and they move to purchase the product and service from different area, then geographically every country they havenââ¬â¢t an entire resources, then the organization need a international support to achieve the market position. Global customers are other important factors who determine the international business and globalization, earlier the customers are requires the local product, and their requirement was limited to local but today international organization and multinational organization makes the customer limit into global, then the organization makes the international business and covers global customers as well International channeling and communication is another factor that drive the globalization today, telecommunication services are developed in many factors that makes the globalization into more effective and efficient, basically telecommunication development makes the globalization into effective and efficient. Technology There are many powerful factors of demand changes but the preference factor is technology. Today world is technology world. Technology affects and makes the changes in entire sectors. When the technology will change or update then the less period the organization can evaluate the sign of demand changes. Day to day technology development makes the organization survival into more difficult, but the organization also includes the innovation and create new concept into the business Strengths of market drivers Today a market driver makes the globalization into more effective and efficiency, there are many global areas, and business sector makes the process and business into standard. Specially banking industries, Soft drink industries, automobile industries, computer, aircraft industries are makes the market strength, and many industries uses the globalization to achieve the better position in the market as well. Traditionally and Separate different national markets are merging into one huge global marketplace where the preferences tastes and purchasing behavior of consumers in different nations are starting to converge to some global model. Cost drivers Second major important sector that determine the globalization is cost drivers, basically organization provide more importance for two activities, which are income level and cost, organization used the globalization to increase the income level and reduces the cost. Global scale economics, production different, changing technology, production development cost are the major factors that affect the globalization. Competitive advantages, absolute advantages are mostly consider under the cost drivers. Organization cost and scale of cost determines the globalization, firstly every organization consider the cost, and compare the cost, then the organization moves to less cost product and service, then the organization can increase the profit and income. Cost drivers are makes the activities and process into more better. Being lowers its overall costs by sourcing, manufacturing, and selling aircraft worldwide. Government and environmental factors Government and environmental factors that directly drive the globalization, trade policy is the main concern in the government sectors, every country that have a special government policies, and procedures, then the organization cannot freely provide the service to the market, then the organization must adopt to the government. government policies, and there economy policy decide the globalization activities as well. Government is another factors influence in the demand. Mostly government makes some changes and update in the country ongoing g process. Sometime country government directly influence in demand. Introduce new tariff, Tax holidays, newly product imports, increase or decrease Tax Government awareness programs, provide market ideas to citizen, political inflexible, Government budget deficit and etc. The above government intervention makes the changes in the demand and Government can make every changes so this is the more risky and powerful factors in demand changes Government system and procedures changes are another impact of the globalization. System and procedures changes inform that culture of the organization is different from the others. When government every small changes will makes the system also to be change. Simply government system and procedures are depending in country policy and economy scale., changes in government procedures, include new system, reporting power change, authority structure change, new people arrivals and economy interest rate, inflation rate are the major changes occurs after influence government drivers of globalization. Competitive drivers Every sector face the problem of competition, many academic people argued that the competition is the best sign for the healthy marketing. Today business is customer based business and the customers are king. Organization avoid the customer needs mean that is the major risk to the company. Globalization strategy is the better strategy to faced the competition challenges, Organization faced many problems in the internal and external factors, every organization provide the close competition to the product and service, then the organization need to up-date the product and service, makes the innovation services are more important to the organization, then the organization expand its service and range by day to day and that makes the globalization into more effective and essentials. Advantages and disadvantages of globalization Many years and decades that the above concept under the debates, because the organization and country were received the mixed results on globalization. Many development countries received the positive result from globalizations and developing countries failed to receive the positive result. There are many impacts that occurred from the globalization as follows, Globalization has positive side and negative side to both country and business as well. Specially economy that describes that income level increase, GDP and GNP level increase, market expansion, technology development, innovation and creativity activities, market trend increase, global standard products, quality of the product and service, and etc. But other side of the globalization that describes that country loss their own nature, and cultural impact, increase the poverty, market and resources are highly consumed, environmental impacts, social and individual attitude changes, and etc Advantages of globalization International Trade Today international trade and achieve the better market position are the main concern of international trade. International trade has become wider its possibility with the help of business process outsourcing, purchase and sale of product and service are not the only two transactions involved in international trade. International trade reduce the border of nation to nation and that makes the economy into more strength, specially international business process as well import and export are became huge growth, that impact to income per person and process. GDP and GNP increase is the another milestone advantage to the country and net profit increase, gross profit and profit margin increases are another favourable aspects in the globalization, when international market reduce the tariff, release the tax and other government intervention, then many investors interest to increase the investment in the market. Higher Sales Once product, service or company gets on the radar screen of scenario, it increases chances that consumers will make a purchase. As knowledge becomes a truth, it is also the point where new customers start to extend the word, telling friends and family about this remarkable new product they exposed. Sales will steadily increase as spreads. Without employing marketing strategies, these sales may not have ever happened Healthy Competition Marketing also foster an environment in the marketplace for strong completion. Marketing hard work get the word out on pricing of products and services, this not only reaches the future consumers, but also reaches other companies competing for the consumersââ¬â¢ business. As opposed to companies that have a control on products and services that can blame almost any price, marketing helps keep pricing competitive for a business to try to win over consumers before its competition does. Without competition, well known companies would continue to sell while lesser known companies or new companies would situate little possibility of ever becoming successful. Marketing facilitates the healthy competition that allows small businesses and new businesses to be successful enter and grow in the marketplace Innovation and Intellectual Property The strength of enterprise is able to be seen across the victory stories that characterize many of businesses. The will to be successful even with the chances is what drive to grow businesses from position up, globalization makes the business into more effective and makes the human resource into more effective, that makes the creativity thoughts and innovation. Other favourable advantages of globalization as follows, Channel Execution system and implementation of recognized social media channels (Face book, Twitter, YouTube, Google+, Foursquare, YouTube, LinkedIn, Interest and more). Strategy Implementation put into practice and personalizes your social marketing tactic including designing, building and executing social media tactics. Campaign activities generate designs and a satisfied marketing strategy that correspond with a specific campaign or promotional materials. Online Reputation Management make the most of proactive discussion monitoring to assist brands to listen, understand and connect in conversations in social media. Blogger Relations Conduct blogger outreach campaigns to influence the influencers and boost the reach of your messaging. Event Integration integrate social media into events, shows, and conference to increase alertness, word of mouth marketing and contribution Communication Communication and telecommunication development makes the organization process into effective. Today globalization makes the process and procedures into effective. Information technology has played a vital role in bringing the countries closer in terms of communication every single information is easily accessible from almost every corner of the world. The Internet has significantly affected the global economy, thereby providing direct access to information and products. Disadvantages of globalization Loss of Culture Every nation they have separate culture, and that recognize the country, After the globalization not impact on economy but also impact on culture, then that makes negative impact, and another economy cultures that directly influence on local country culture, and economy.. With large number of people migrate into and out of a country. They tend to follow the foreign culture more, forgetting their own roots. This can give rise to cultural conflicts. Monopoly Monopoly is a situation where in only one seller has a say in a particular product or products. It is possible that when a product is the leader in its field, the company may begin to exploit the consumers; the leader takes full advantage of the sale of its product, which may later lead to illegal and unethical practices being followed. Monopoly is disastrous as it widens the gap between the developed and developing countries. Environmental issues Every organization that entered to another economy and operate the business in different countries, then the globalization moves the capital into one place to another place then the organization starts the large investment, then the country or organization mislead the resources, that makes the process into defective. Monopoly Monopoly is a situation where in only one seller has a say in a particular product or products. It is possible that when a product is the leader in its field, the company may begin to exploit the consumers. As there exists no close competitors, the leader takes full advantage of the sale of its product, which may later lead to illegal and unethical practices being followed. Monopoly is disastrous as it widens the gap between the developed and developing countries. Developed countries can suppress development of undeveloped and under-developed countries, then the development countries uses the developing countries for only resource requirement, then the organization or developing countries are not interest in the globalization Economic depression in one country can trigger adverse reaction across the globe. It can increase spread of communicable diseases. Companies face much greater competition. This can put smaller companies, at a disadvantage as they do not have resources to compete at global scale.
Subscribe to:
Posts (Atom)